PLASTERBOARD FINISHING SOLUTIONS
JOINT, SKIM & FILL
SURFACE FINISHING, FILLING & JOINTING:
Suitable for interior use. Easy to sand and apply in one coat with no shrinkage and no depth limit. Conform...
Suitable for interior use. Easy to sand and apply in one coat with no shrinkage and no depth limit. Conform...
- One coat
- Easy to sand
- No shrinkage, no depth limit
- No need to spot prime
- Characteristics
- Technical documents
- Surfaces
- Directions for use
- Video
- Application
- Your questions
Characteristics
SURFACE FINISHING, FILLING & JOINTING:
Suitable for interior use. Easy to sand and apply in one coat with no shrinkage and no depth limit. Conforms to BS EN 13963 for jointing applications.
The typical recommended application thickness for plasterboard skimming and jointing is 0.5mm. This product can also be used for more substantial levelling applications.
Suitable for interior use. Easy to sand and apply in one coat with no shrinkage and no depth limit. Conforms to BS EN 13963 for jointing applications.
The typical recommended application thickness for plasterboard skimming and jointing is 0.5mm. This product can also be used for more substantial levelling applications.
Code
FGBJ05GB
Surface condition
Interior
Task
Jointing plasterboard
Application method
Manual
Time between coats
1 Hour
Surfaces
Gypsum, plaster board, old painted surfaces, cement, concrete, cellular concrete, primed wood
Overcoat with
Any type of filler, paint or wall coating
Maximum recommended application thickness
No depth limitation.
Mixing rate
/
Ready to paint time
12 to 24 Hours.
Working time
40 min.
Application tools
Blade.
Wall scraper.
Trowel.
Wall scraper.
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa.
Coverage g/m² (at 1mm thickness)
1100.00
IAQ (Indoor Air Quality) classification
A+
Colour when dry
White.
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity.
Clean tools with
Water.
Pack sizes
- Bag 5 KG
- Bag 10 KG
Surfaces
Gypsum, plaster board, old painted surfaces, cement, concrete, cellular concrete, primed wood
Directions for use
Do not apply on exterior surfaces.
Video
Viewing this video may result in the use of cookies by the video platform partner. Given your refusal to accept cookies, and out of respect for your choice, we have blocked the playback of this video. If you wish to continue viewing, please give us your consent by clicking on the button below.
Application
1
Filling: Add 380ml water per 1kg powder (38%).
Skimming: Add 420ml water per 1kg powder (42%).
Add powder to water at room temperature. Stir until smooth.
Skimming: Add 420ml water per 1kg powder (42%).
Add powder to water at room temperature. Stir until smooth.
2
Apply manually using a coating blade or trowel. No fill depth limit.
For normal applications, one coat is all you need. For extreme applications, more than one coat may be necessary
For normal applications, one coat is all you need. For extreme applications, more than one coat may be necessary
3
.jpg)
Can be painted 12-24 hours after application, dependant on the substrate, coat thickness, and ambient conditions