PLASTERBOARD FINISHING SOLUTIONS
PATCH & REPAIR FILLER: QUICK DRY
QUICK DRY REPAIR FILLER FOR GAPS, CRACKS, SCRATCHES AND HOLES:
On plasterboard and other interior surfaces. Ready to cover in just 3 hours. Easy to...
On plasterboard and other interior surfaces. Ready to cover in just 3 hours. Easy to...
- Ready to paint in 3 hours
- One coat
- Easy to sand
- No shrinkage, no depth limit
- No need to spot prime
- Characteristics
- Technical documents
- Surfaces
- Directions for use
- Application
- Your questions
Characteristics
QUICK DRY REPAIR FILLER FOR GAPS, CRACKS, SCRATCHES AND HOLES:
On plasterboard and other interior surfaces. Ready to cover in just 3 hours. Easy to sand, with no shrinkage, no depth limit and no need to spot prime.
On plasterboard and other interior surfaces. Ready to cover in just 3 hours. Easy to sand, with no shrinkage, no depth limit and no need to spot prime.
Code
FGREB02GB
Surface condition
Interior
Task
Filling and repairing (holes, gaps, cracks)
Application method
Manual
Time between coats
1 Hour
Surfaces
Painted or unpainted substrates: gypsum plaster, plasterboard, old painted surfaces, any fillers in the Toupret range, cement, concrete, cellular concrete, breeze blocks, bricks, stone, primed Wood
Overcoat with
Can be coated with any type of filler, paint or wall coating.
Maximum recommended application thickness
No depth limitation
Mixing rate
/
Ready to paint time
3 Hours
Working time
40 min.
Application tools
Filling knife
Filling knife.
Trowel.
Filling knife.
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
N/A
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity
Clean tools with
Water.
Pack sizes
- Box 1 KG
- Box 2 KG
- Bag 5 KG
Surfaces
Painted or unpainted substrates: gypsum plaster, plasterboard, old painted surfaces, any fillers in the Toupret range, cement, concrete, cellular concrete, breeze blocks, bricks, stone, primed Wood
Directions for use
Do not apply on exterior surfaces.
Application
1
Mixing rate: Add 450ml water per 1kg powder (45%).
Add powder to water at room temperature. Stir until smooth.
Add powder to water at room temperature. Stir until smooth.
2
Apply manually using a coating blade or trowel. No fill depth limit.
3
Can be painted 3 hours after application, dependant on the substrate, coat thickness, and ambient conditions