JOINT & SKIM: READY TO USE
JOINT & SKIM: READY TO USE
JOINT & SKIM: READY TO USE

PLASTERBOARD FINISHING SOLUTIONS

JOINT & SKIM: READY TO USE

SURFACE FINISHING & PLASTERBOARD JOINTING:
Ready to use on interior surfaces for plasterboard jointing and surface finishing and can be applied man...
  • Easy to sand
  • Smooth application
  • No need to spot prime
  • For manual or spray application
Where to buy

Estimate quantities for levelling and smoothing

Characteristics

SURFACE FINISHING & PLASTERBOARD JOINTING:
Ready to use on interior surfaces for plasterboard jointing and surface finishing and can be applied manually or with an airless spray machine. Easy to sand and apply with minimal shrinkage. Conforms to BS EN 13963 for jointing applications.

The typical recommended application thickness for plasterboard skimming and jointing is 0.5mm.

Code
FGBJP20GB
Surface condition
Interior
Task
Filling and repairing (holes, gaps, cracks)
Jointing plasterboard
Skimming plasterboard
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Gypsum, plaster board, old painted surfaces, cement, concrete, cellular concrete, primed wood
Overcoat with
Any type of filler, paint or wall coating.
Maximum recommended application thickness
Up to 5 mm.
Mixing rate
Ready to Use.
Ready to paint time
12 to 24 Hours
Working time
No limit
Application tools
Filling knife
Blade
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
1700.00
IAQ (Indoor Air Quality) classification
A+
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity
Clean tools with
Water.
Pack sizes
  • Bucket 10 KG
  • Bucket 20 KG

Technical documents

Surfaces

Gypsum, plaster board, old painted surfaces, cement, concrete, cellular concrete, primed wood

Directions for use

Do not apply on exterior surfaces.

Video

Viewing this video may result in the use of cookies by the video platform partner. Given your refusal to accept cookies, and out of respect for your choice, we have blocked the playback of this video. If you wish to continue viewing, please give us your consent by clicking on the button below.

Application

1

Apply manually using a coating blade or trowel.
Suitable for machine application (5L per minute flow rate)

2

Can be applied up to 5mm thick

3

Can be painted 12-24 hours after application, dependant on the substrate, coat thickness, and ambient conditions

Your questions

See all

How does this compare to plaster?

Can Joint, Skim & Fill cover Artex® and have a long-lasting, hard finish?

What is the difference between Joint & Skim: Ready To Use and Renovation Skimcoat?

Can interior fillers be used on wood?