RENOVATION SKIMCOAT
RENOVATION SKIMCOAT

INTERIOR SURFACES

RENOVATION SKIMCOAT

READY TO USE FILLER FOR LEVELLING & FINISHING DAMAGED AND TEXTURED SURFACES:
For interior jobs. Also certified for jointing. It's especially suitab...
  • Ideal for skimming rough & textured surfaces
  • Plasterboard jointing certified
  • No PVA required, no need to spot prime
  • Easy to sand
Where to buy

Estimate quantities for levelling and smoothing

Characteristics

READY TO USE FILLER FOR LEVELLING & FINISHING DAMAGED AND TEXTURED SURFACES:
For interior jobs. Also certified for jointing. It's especially suitable for high-build applications (up to 5mm) such as levelling rough surfaces and covering texture, stucco and Artex. Can be applied directly to un-primed walls, no PVA required. Can be overpainted in 12-24 hours. The typical recommended application thickness is 1.0mm

Code
TTEGALP10GB
Surface condition
Interior
Task
Levelling uneven surfaces
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Cement, concrete, cellular concrete, breeze blocks, bricks, stone, gypsum plaster, plasterboard/drywall lining, old painted surfaces, old textured surfaces
Overcoat with
Any type of paint and wallpaper. Any type of Toupret filler.
Maximum recommended application thickness
Up to 5 mm.
Mixing rate
Ready to Use
Ready to paint time
12 to 24 Hours
Working time
No limit
Application tools
Filling knife
Trowel
Blade
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
1700.00
IAQ (Indoor Air Quality) classification
A
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with
Water
Pack sizes
  • Bucket 10 KG

Technical documents

Surfaces

Cement, concrete, cellular concrete, breeze blocks, bricks, stone, gypsum plaster, plasterboard/drywall lining, old painted surfaces, old textured surfaces

Directions for use

Do not apply on exterior surfaces.

Application

1

Open the cracks up with a scraper and dust.
Fill the cavities.
Level off by criss-crossing the passes.
Sand when dry.

2

Skim with a coating blade or trowel up to 5mm thick.
Sand when dry.

3

Can be painted 12-24 hours after application, dependant on the substrate, coat thickness, and ambient conditions

4

UKCA certified for jointing

Your questions

See all

What is the difference between Joint & Skim: Ready To Use and Renovation Skimcoat?

Do I need to spot prime to prevent flashing and grinning if my paint has a high sheen level?