WOOD SURFACES
WOOD FILLER (NATURAL WOOD)
Fill, Sand & Finish – A Ready-to-Use Wood Filler for Interior and Exterior Repairs
Our Wood Filler is a ready-to-use, one-component wood filler...
Our Wood Filler is a ready-to-use, one-component wood filler...
- Easy to apply and sand to a smooth finish
- Ready to overcoat after 24 hours
- Compatible with all conventional paints, varnishes and stains
- Can be drilled and screwed once set
- Interior and exterior use
- Characteristics
- Technical documents
- Surfaces
- Directions for use
- Video
- Application
- Related products
- Your questions
Characteristics
Fill, Sand & Finish – A Ready-to-Use Wood Filler for Interior and Exterior Repairs
Our Wood Filler is a ready-to-use, one-component wood filler designed for filling and finishing wood surfaces both inside and outside. Ideal for nail holes, small cracks, gaps, dents and surface imperfections, it provides a smooth, durable fill that can be sanded flush and overcoated with any conventional paint, varnish or stain.
Straight from the tub with no mixing required, it applies easily with a filling knife or scraper and sands to a fine, smooth finish once dry. It can also be drilled and screwed once set, making it suitable for areas where fixings may be needed later.
Ready to overcoat after 24 hours, it accepts all standard paints and coatings. Low odour makes it practical to use in kitchens, bathrooms and other occupied or enclosed areas. The natural wood shade blends well under clear or lightly pigmented finishes.
Once dry, the product must be painted or overcoated. It is not suitable as a bare, exposed finish.
Our Wood Filler is a ready-to-use, one-component wood filler designed for filling and finishing wood surfaces both inside and outside. Ideal for nail holes, small cracks, gaps, dents and surface imperfections, it provides a smooth, durable fill that can be sanded flush and overcoated with any conventional paint, varnish or stain.
Straight from the tub with no mixing required, it applies easily with a filling knife or scraper and sands to a fine, smooth finish once dry. It can also be drilled and screwed once set, making it suitable for areas where fixings may be needed later.
Ready to overcoat after 24 hours, it accepts all standard paints and coatings. Low odour makes it practical to use in kitchens, bathrooms and other occupied or enclosed areas. The natural wood shade blends well under clear or lightly pigmented finishes.
Once dry, the product must be painted or overcoated. It is not suitable as a bare, exposed finish.
Code
TTRPBO1.25GB
Surface condition
Interior / Exterior
Task
Filling and repairing (holes, gaps, cracks)
Application method
Manual
Time between coats
As soon as the filler is dry.
Surfaces
Any type of wood, including exotic species, chipboard and plywood.
Overcoat with
Any type of conventional paints, varnishes or stains.
Maximum recommended application thickness
Up to 1 cm.
Mixing rate
Ready to Use.
Ready to paint time
12 to 24 Hours.
Working time
No limit.
Application tools
Blade.
Trowel.
Putty knife.
Trowel.
Putty knife.
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
Adhesion filler/substrate (NFT 30-608): > 0.8 Mpa.
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
N/A
Colour when dry
White pr natural wood.
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with
Water.
Pack sizes
- Tube 0.33 KG
- Tub 1.25 KG
Surfaces
Any type of wood, including exotic species, chipboard and plywood.
Directions for use
Once dry, It must be painted or overcoated.
Video
Viewing this video may result in the use of cookies by the video platform partner. Given your refusal to accept cookies, and out of respect for your choice, we have blocked the playback of this video. If you wish to continue viewing, please give us your consent by clicking on the button below.
Application
1
Apply manually using a coating blade or trowel.
2
Fills up to 1cm deep
3
Can be overcoated 12-24 hours after application, dependant on the substrate, coat thickness, and ambient conditions
