WOOD FILLER (NATURAL WOOD)
WOOD FILLER (NATURAL WOOD)
WOOD FILLER (NATURAL WOOD)

WOOD SURFACES

WOOD FILLER (NATURAL WOOD)

READY TO USE ON INTERIOR & EXTERIOR WOOD:
Can be stained or painted with any type of conventional paint, varnish or stain after 24 hours. It can al...
  • Ready to use on interiors & exteriors
  • Easy to apply and sand
  • Compatible with all paints and coatings
  • Can be drilled and screwed
  • Low odour
Where to buy

Characteristics

READY TO USE ON INTERIOR & EXTERIOR WOOD:
Can be stained or painted with any type of conventional paint, varnish or stain after 24 hours. It can also be drilled and is very easy to sand. Suitable for both internal and external use. Low odour. Can be used on all types of wood, including exotic species, chipboard and plywood.
Colour: Natural Wood

Code
TTRPBO1.25GB
Surface condition
Interior / Exterior
Task
Filling and repairing (holes, gaps, cracks)
Shaping and repairing without formwork
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Any type of wood, including exotic species, chipboard and plywood.
Overcoat with
Any type of conventional paints, varnishes or stains.
Maximum recommended application thickness
Up to 1 cm.
Mixing rate
Ready to Use.
Ready to paint time
12 to 24 Hours
Working time
No limit
Application tools
Filling knife
Trowel.
Blade.
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
Adhesion filler/substrate (NFT 30-608): > 0.8 Mpa
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
N/A
Colour when dry
/
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with
Water.
Pack sizes
  • Tube 0.33 KG
  • Tub 1.25 KG

Technical documents

Datasheet

Download

Surfaces

Any type of wood, including exotic species, chipboard and plywood.

Directions for use

Once dry, It must be painted or overcoated.

Video

Viewing this video may result in the use of cookies by the video platform partner. Given your refusal to accept cookies, and out of respect for your choice, we have blocked the playback of this video. If you wish to continue viewing, please give us your consent by clicking on the button below.

Application

1

Apply manually using a coating blade or trowel.

2

Fills up to 1cm deep

3

Can be overcoated 12-24 hours after application, dependant on the substrate, coat thickness, and ambient conditions

Related products