JOINT, SKIM & FILL
JOINT, SKIM & FILL
JOINT, SKIM & FILL
JOINT, SKIM & FILL
JOINT, SKIM & FILL

PLASTERBOARD FINISHING SOLUTIONS

JOINT, SKIM & FILL

SURFACE FINISHING, FILLING & JOINTING:
Suitable for interior use. Easy to sand and apply in one coat with no shrinkage and no depth limit. Conform...
  • One coat
  • Easy to sand
  • No shrinkage, no depth limit
  • No need to spot prime
Where to buy

Estimate quantities for levelling and smoothing

Characteristics

SURFACE FINISHING, FILLING & JOINTING:
Suitable for interior use. Easy to sand and apply in one coat with no shrinkage and no depth limit. Conforms to BS EN 13963 for jointing applications.

The typical recommended application thickness for plasterboard skimming and jointing is 0.5mm. This product can also be used for more substantial levelling applications.

Code
FGBJ05GB
Surface condition
Interior
Task
Filling and repairing (holes, gaps, cracks)
Jointing plasterboard
Skimming plasterboard
Application method
Manual
Time between coats
1 Hour
Surfaces
Gypsum, plaster board, old painted surfaces, cement, concrete, cellular concrete, primed wood
Overcoat with
Any type of filler, paint or wall coating
Maximum recommended application thickness
No depth limitation
Mixing rate
/
Ready to paint time
12 to 24 Hours
Working time
40 min.
Application tools
Filling knife
Blade
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
1100.00
IAQ (Indoor Air Quality) classification
A+
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity
Clean tools with
Water.
Pack sizes
  • Bag 5 KG
  • Bag 10 KG

Technical documents

Surfaces

Gypsum, plaster board, old painted surfaces, cement, concrete, cellular concrete, primed wood

Directions for use

Do not apply on exterior surfaces.

Video

Viewing this video may result in the use of cookies by the video platform partner. Given your refusal to accept cookies, and out of respect for your choice, we have blocked the playback of this video. If you wish to continue viewing, please give us your consent by clicking on the button below.

Application

1

Filling: Add 380ml water per 1kg powder (38%).
Skimming: Add 420ml water per 1kg powder (42%).
Add powder to water at room temperature. Stir until smooth.

2

Apply manually using a coating blade or trowel. No fill depth limit.
For normal applications, one coat is all you need. For extreme applications, more than one coat may be necessary

3

Can be painted 12-24 hours after application, dependant on the substrate, coat thickness, and ambient conditions

Your questions

See all

How does this compare to plaster?

Can Joint, Skim & Fill cover Artex® and have a long-lasting, hard finish?

Can interior fillers be used on wood?