PROBLEM SURFACES
ANTI-DAMP TREATMENT
Ready to Use Moisture Barrier for Damp Interior and Exterior Surfaces:
Anti-Damp Treatment is a ready to use, water-based moisture barrier desi...
Anti-Damp Treatment is a ready to use, water-based moisture barrier desi...
- Blocks localised problem moisture on interior and exterior surfaces
- Covers micro-cracks
- Water-based
- Dries white
- Characteristics
- Technical documents
- Surfaces
- Directions for use
- Application
Characteristics
Ready to Use Moisture Barrier for Damp Interior and Exterior Surfaces:
Anti-Damp Treatment is a ready to use, water-based moisture barrier designed to seal and block localised damp on interior and exterior surfaces. Anti-Damp Treatment is applied directly to problem areas by brush or roller to seal moisture at source before filling, painting, or wallpapering over the top.
Applied in one or two coats directly to damp, bare substrates, it penetrates the surface and blocks moisture from working through to the finished surface. It also covers micro-cracks in the substrate, sealing hairline fractures that would otherwise allow moisture to continue penetrating.
After 8 hours it is ready for a second coat if needed, and fully ready to paint, fill, or wallpaper over after 24 hours.
Supplied ready to use, it requires no mixing and is easy to clean off tools.
Anti-Damp Treatment is a ready to use, water-based moisture barrier designed to seal and block localised damp on interior and exterior surfaces. Anti-Damp Treatment is applied directly to problem areas by brush or roller to seal moisture at source before filling, painting, or wallpapering over the top.
Applied in one or two coats directly to damp, bare substrates, it penetrates the surface and blocks moisture from working through to the finished surface. It also covers micro-cracks in the substrate, sealing hairline fractures that would otherwise allow moisture to continue penetrating.
After 8 hours it is ready for a second coat if needed, and fully ready to paint, fill, or wallpaper over after 24 hours.
Supplied ready to use, it requires no mixing and is easy to clean off tools.
Code
TTHS01GB
Surface condition
Interior / Exterior
Task
Surface treatment
Application method
Manual
Time between coats
8 Hours
Surfaces
Damp substrates: cement, bricks, stone, old painted surfaces
Overcoat with
Any type of paint. Any type of wallpaper or Toupret filler.
Maximum recommended application thickness
/
Mixing rate
/
Ready to paint time
24 Hours.
Working time
No limit.
Application tools
Brush
Roller
Roller
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
/
Coverage g/m² (at 1mm thickness)
333.00
IAQ (Indoor Air Quality) classification
/
Colour when dry
White.
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with
Water.
Pack sizes
- Tin 1 KG
Surfaces
Damp substrates: cement, bricks, stone, old painted surfaces
Directions for use
Do not apply in direct sunlight, overheated or frozen substrates.
Application
1
.jpg)
Apply manually using a brush or roller.
2
Can be painted 24 hours after application, dependant on the substrate, coat thickness, and ambient conditions