ANTI-DAMP RENDER

PROBLEM SURFACES

ANTI-DAMP RENDER

BREATHABLE BARRIER FOR DAMP, POROUS & UNTREATED MASONRY:
Controls damp on interior and exterior surfaces while letting them breathe due to its wate...
  • Controls damp
  • For basements & garages
  • Exteriors: blocks water penetration
  • Interiors: a barrier to water, while letting substrates breathe
  • No need to seal the substrate *
Where to buy

Estimate quantities for levelling and smoothing

Characteristics

BREATHABLE BARRIER FOR DAMP, POROUS & UNTREATED MASONRY:
Controls damp on interior and exterior surfaces while letting them breathe due to its water-vapour permeability. On exteriors it blocks water penetration, on interiors it acts as a water barrier while letting the substrate breathe. Ideal for cellars and basements. Using a brush or trowel, it can be applied to damp and raw masonry substrates. Can be painted.

The typical recommended application thickness is 1.5mm.

Warning - Please carefully follow usage instructions and refer to the technical data sheet.

Code
TTHUMIB06GB
Surface condition
Interior / Exterior
Task
Levelling uneven surfaces
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Cement, concrete, cellular concrete, breeze blocks, bricks, stone
Interior or exterior raw masonry, dry or damp.
Substrates to be treated must be stripped down to the masonry before application
Overcoat with
Any type of Toupret filler, paint or wall coating
Maximum recommended application thickness
Up to 1 cm.
Mixing rate
/
Ready to paint time
12 to 24 Hours
Working time
3 to 4 Hours
Application tools
Roller
Brush
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
Adhesion filler/substrate (EN 16-566): > 0.8 Mpa
Coverage g/m² (at 1mm thickness)
1500.00
IAQ (Indoor Air Quality) classification
A+
Colour when dry
White
Guarantee
Product guaranteed for 6 months from purchase, in original package and stored away from humidity.
Clean tools with
Water
Pack sizes
  • Bag 6 KG

Technical documents

Datasheet

Download

Surfaces

Cement, concrete, cellular concrete, breeze blocks, bricks, stone
Interior or exterior raw masonry, dry or damp.
Substrates to be treated must be stripped down to the masonry before application

Video

Viewing this video may result in the use of cookies by the video platform partner. Given your refusal to accept cookies, and out of respect for your choice, we have blocked the playback of this video. If you wish to continue viewing, please give us your consent by clicking on the button below.

Application

1

Mixing rate: Add 220ml water per 1kg powder (22%).
Add powder to water at room temperature. Stir until smooth.

2

Apply manually using a coating blade or trowel between 2mm-1cm deep.

3

Can be painted 24-48 hours after application, dependant on the substrate, coat thickness, and ambient conditions

Your questions

See all

Is Anti-Damp Render a filler or a render?

What is the maximum depth for Anti-Damp-Render?

Which filler should I use for treating damp walls?