PLASTERBOARD FINISHING SOLUTIONS
METAL CORNER TAPE
Metal Reinforced Paper Tape for Internal and External Plasterboard Corners:
Metal Corner Tape is a professional corner jointing tape designed for f...
Metal Corner Tape is a professional corner jointing tape designed for f...
- Paper tape reinforced with metal strips for strength
- Central groove for accurate, consistent folding
- Resists bending
- 51mm x 30m per roll
- Characteristics
- Technical documents
- Surfaces
- Directions for use
Characteristics
Metal Reinforced Paper Tape for Internal and External Plasterboard Corners:
Metal Corner Tape is a professional corner jointing tape designed for finishing both internal and external plasterboard corners cleanly and durably. Unlike standard paper tape, it is reinforced with galvanised metal strips running along the center, which give the finished corner greater strength and rigidity to resist dents, knocks and general wear.
It can be used on any tapered or butted plasterboard and is recommended for use with our Plasterboard Finishing Solutions.
Metal Corner Tape is a professional corner jointing tape designed for finishing both internal and external plasterboard corners cleanly and durably. Unlike standard paper tape, it is reinforced with galvanised metal strips running along the center, which give the finished corner greater strength and rigidity to resist dents, knocks and general wear.
It can be used on any tapered or butted plasterboard and is recommended for use with our Plasterboard Finishing Solutions.
Code
FGCT0530GB
Surface condition
Interior / Exterior
Task
Jointing plasterboard
Application method
Manual
Time between coats
/
Surfaces
Metal Corner Tape can be applied to any tapered or butted plasterboard.
Overcoat with
Any type of filler, paint or wall covering.
Maximum recommended application thickness
/
Mixing rate
/
Ready to paint time
/
Working time
/
Application tools
Putty knife.
Taping knife.
Taping knife.
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
/
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
N/A
Colour when dry
/
Guarantee
Store in a cool, dry place away from moisture.
Clean tools with
Water.
Pack sizes
- Blister 5 cm x 30 m
Surfaces
Metal Corner Tape can be applied to any tapered or butted plasterboard.
Directions for use
Remove all non-adherent or friable parts.