PLASTERBOARD FINISHING SOLUTIONS
JOINT FILLER 1H POW
TOUPRET Joint Filler 1 Hour is suitable for plasterboard jointing and filling. It has a working time of 1 hour, is easy to sand, and adheres to painte...
- 1 HOUR WORKING TIME
- ADHERES TO PAINTED SURFACES
- EASY TO SAND
- SUITABLE FOR PATCHING
Estimate quantities for levelling and smoothing
m²
- Characteristics
- Technical documents
- Surfaces
- Directions for use
- Application
Characteristics
TOUPRET Joint Filler 1 Hour is suitable for plasterboard jointing and filling. It has a working time of 1 hour, is easy to sand, and adheres to painted surfaces, for general filling work, with no shrinkage and no depth limit. It can be applied to gypsum plaster, plasterboard/drywall and old painted surfaces.There is no need to prime or seal the surface before application.Suitable for interior use. Overcoat with any filler, conventional paints and wall coverings.Conforms to BS EN 13963 for jointing applications.
Code
FGJ1H15GB
Surface condition
Interior
Task
Filling and repairing (holes, gaps, cracks)
Levelling uneven surfaces
Fine finishing surfaces
Skimming plasterboard
Levelling uneven surfaces
Fine finishing surfaces
Skimming plasterboard
Application method
Manual
Time between coats
4 Hours
Surfaces
Joint Filler 1 Hour can be applied to:
Gypsum plaster, plasterboard/drywall and old painted surfaces.
There is no need to prime or seal the surface before application.
Gypsum plaster, plasterboard/drywall and old painted surfaces.
There is no need to prime or seal the surface before application.
Overcoat with
Joint Filler 1 Hour can be overcoated with any type of filler, paint or
wall coating.
wall coating.
Maximum recommended application thickness
Suitable for small filling jobs.
Mixing rate
42% water
Ready to paint time
24 Hours
Working time
1 Hour
Application tools
20cm blade.
Filling knife.
Filling knife
Filling knife.
Filling knife
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
1050.00
IAQ (Indoor Air Quality) classification
A+
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity
Clean tools with
Water.
Pack sizes
- Bag L
Surfaces
Joint Filler 1 Hour can be applied to:
Gypsum plaster, plasterboard/drywall and old painted surfaces.
There is no need to prime or seal the surface before application.
Gypsum plaster, plasterboard/drywall and old painted surfaces.
There is no need to prime or seal the surface before application.
Directions for use
Do not apply on exterior surfaces.
Do not apply in direct sunlight, overheated or frozen substrates.
Do not apply on bonded coatings.
Do not apply over polystyrene.
Do not apply on damp grounds.
Application
1
Filling: Add 380ml water per 1kg powder (38%).
Skimming: Add 420ml water per 1kg powder (45%).
Add powder to water at room temperature. Stir until smooth.
Skimming: Add 420ml water per 1kg powder (45%).
Add powder to water at room temperature. Stir until smooth.
2
Apply manually using a coating blade or trowel. No fill depth limit.
For normal applications, one coat is all you need. For extreme applications, more than one coat may be necessary
For normal applications, one coat is all you need. For extreme applications, more than one coat may be necessary
3
Can be painted 3 hours after application, dependant on the substrate, coat thickness,
and ambient conditions"
and ambient conditions"