INTERIOR SURFACES
FINE SURFACE FILLER
FOR FINE SMOOTHING OVER SMALL DEFECTS:
Ready to use for interior surfaces. Use over new or renovated substrates for an exceptionally smooth finish ...
Ready to use for interior surfaces. Use over new or renovated substrates for an exceptionally smooth finish ...
- Adheres to paintwork
- Easy to sand
- No need to spot prime
- Will not flash or grin
Estimate quantities for levelling and smoothing
m²
- Characteristics
- Technical documents
- Surfaces
- Directions for use
- Application
- Your questions
Characteristics
FOR FINE SMOOTHING OVER SMALL DEFECTS:
Ready to use for interior surfaces. Use over new or renovated substrates for an exceptionally smooth finish that helps to enhance the appearance of paint finishes. No need to sand or spot prime.
The typical recommended application thickness is 0.5mm
Ready to use for interior surfaces. Use over new or renovated substrates for an exceptionally smooth finish that helps to enhance the appearance of paint finishes. No need to sand or spot prime.
The typical recommended application thickness is 0.5mm
Code
TTLIP01.5GB
Surface condition
Interior
Task
Fine finishing surfaces
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
New or renovated substrates, either unpainted or painted:
Gypsum plaster, plaster tiles, plasterboards, old painted surfaces, any fillers, cement, concrete
Gypsum plaster, plaster tiles, plasterboards, old painted surfaces, any fillers, cement, concrete
Overcoat with
Fine Surface Filler can be overcoated with any Toupret filler, and any type of paint or wall coating.
Maximum recommended application thickness
Up to 1 mm.
Mixing rate
Ready to Use.
Ready to paint time
8 Hours
Working time
No limit
Application tools
Filling knife
Blade.
Trowel.
Blade.
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
450.00
IAQ (Indoor Air Quality) classification
A+
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with
Water.
Pack sizes
- Tube 0.33 KG
- Tub 1.50 KG
- Bucket 4 KG
Surfaces
New or renovated substrates, either unpainted or painted:
Gypsum plaster, plaster tiles, plasterboards, old painted surfaces, any fillers, cement, concrete
Gypsum plaster, plaster tiles, plasterboards, old painted surfaces, any fillers, cement, concrete
Directions for use
Do not apply on exterior surfaces.
Application
1
Apply manually using a blade or trowel. Fills up to 1mm deep.
2
Can be painted 8 hours after application, dependant on the substrate, coat thickness, and ambient conditions