WOOD REPAIR FILLER (NATURAL WOOD)
WOOD REPAIR FILLER (NATURAL WOOD)
WOOD REPAIR FILLER (NATURAL WOOD)

WOOD SURFACES

WOOD REPAIR FILLER (NATURAL WOOD)

EASY TO SHAPE & QUICK DRYING ON INTERIOR & EXTERIOR WOOD:
A durable and versatile powder wood filler that has no depth limit, offers excellent adhe...
  • Ready to paint in 3 hours
  • Working time: 30 minutes
  • Easy to sand & low odour
  • Compatible with all paints & coatings
  • Can be drilled & screwed
Where to buy

Characteristics

EASY TO SHAPE & QUICK DRYING ON INTERIOR & EXTERIOR WOOD:
A durable and versatile powder wood filler that has no depth limit, offers excellent adhesion, is easy to sand and can be shaped. It can also be drilled. Overcoat with any type of conventional paint, varnish or stain after 3 hours. Suitable for both internal and external use. Low odour. Can be used on all types of wood, including exotic species, chipboard and plywood.
Colour: Natural Wood

Code
TTREPBO02GB
Surface condition
Interior / Exterior
Task
Filling and repairing (holes, gaps, cracks)
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Any type of wood, including common exotic species, chipboard and plywood.
Overcoat with
Any type of conventional paints, varnishes or stains.
Maximum recommended application thickness
No depth limitation
Mixing rate
33% water
Ready to paint time
3 Hours
Working time
30 min
Application tools
Filling knife
Blade
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
Adhesion filler/substrate (NFT 30-608): > 0.8 Mpa
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
N/A
Colour when dry
/
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity
Clean tools with
Water.
Pack sizes
  • Box 1 KG
  • Box 2 KG

Technical documents

Datasheet

Download

Surfaces

Any type of wood, including common exotic species, chipboard and plywood.

Directions for use

Once dry, It must be painted or overcoated.

Application

1

Mixing rate: Add 330ml water per 1kg powder (33%).
Add powder to water at room temperature. Stir until smooth.

2

Apply manually using a coating blade or trowel. No depth limit.

3

Can be overcoated 3 hours after application, dependant on the substrate, coat thickness, and ambient conditions