INTERIOR SURFACES
PLASTER OF PARIS
SHAPING & MOULDING:
Ideal for decorative work. Very fine, excellent for fine finishing work. It's quick setting and bright white.
Ideal for decorative work. Very fine, excellent for fine finishing work. It's quick setting and bright white.
- Easy to shape & mould
- Quick setting
- Extra fine
- Easy to sand
- Characteristics
- Technical documents
- Surfaces
- Directions for use
- Application
Characteristics
SHAPING & MOULDING:
Ideal for decorative work. Very fine, excellent for fine finishing work. It's quick setting and bright white.
Ideal for decorative work. Very fine, excellent for fine finishing work. It's quick setting and bright white.
Code
TTPLA04GB
Surface condition
Interior
Task
Shaping and repairing without formwork
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Plaster Of Paris can be applied to unpainted, new or renovated,
substrates:
- Gypsum plaster, gypsum tile, plasterboards/drywall lining
- Cement, concrete, breeze blocks, bricks, mortar.
substrates:
- Gypsum plaster, gypsum tile, plasterboards/drywall lining
- Cement, concrete, breeze blocks, bricks, mortar.
Overcoat with
Plaster Of Paris can be overcoated with any type of filler, paint or wall coating.
Maximum recommended application thickness
No depth limitation
Mixing rate
/
Ready to paint time
24 to 72 Hours
Working time
10 to 15 min
Application tools
Filling knife
Blade.
Trowel.
Blade.
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
/
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
A+
Colour when dry
Extra white
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity
Clean tools with
Water.
Pack sizes
- Bag 4 KG
Surfaces
Plaster Of Paris can be applied to unpainted, new or renovated,
substrates:
- Gypsum plaster, gypsum tile, plasterboards/drywall lining
- Cement, concrete, breeze blocks, bricks, mortar.
substrates:
- Gypsum plaster, gypsum tile, plasterboards/drywall lining
- Cement, concrete, breeze blocks, bricks, mortar.
Directions for use
Do not apply on exterior surfaces.
Do not cover with cement or concrete based product.
Application
1
Mixing rate: Add 750ml water per 1kg powder (75%).
Add powder to water at room temperature. Stir until smooth.
Add powder to water at room temperature. Stir until smooth.
2
Apply manually using a coating blade or trowel. No fill depth limit.
3
Can be painted 24-72 hours after application, dependant on the substrate, coat thickness,
and ambient conditions.
In the case of work involving a large amount of product, the drying time may be significantly longer.
and ambient conditions.
In the case of work involving a large amount of product, the drying time may be significantly longer.