READY TO USE FILLER
READY TO USE FILLER
READY TO USE FILLER
READY TO USE FILLER

INTERIOR SURFACES

READY TO USE FILLER

REPAIRS ON WALLS & CEILINGS:
Ready to use on interior surfaces, straight from the tub. It's very easy to sand down and it won't flash or grin, so t...
  • Easy to apply
  • Easy to sand
  • No need to spot prime
  • Will not flash or grin
Where to buy

Characteristics

REPAIRS ON WALLS & CEILINGS:
Ready to use on interior surfaces, straight from the tub. It's very easy to sand down and it won't flash or grin, so there's no need to spot prime.

Code
TTRPTUBGB
Surface condition
Interior
Task
Filling and repairing (holes, gaps, cracks)
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Ready To Use Filler can be applied to any substrates either
unpainted or painted:
- Gypsum plaster, plasterboards/drywall lining
- Old painted surfaces, cement, concrete, cellular concrete
- Breeze blocks, bricks, stone and primed wood
Overcoat with
Ready To Use Filler can be overcoated with any type of filler, paint or wall coating.
Maximum recommended application thickness
Up to 1 cm.
Mixing rate
Ready to Use.
Ready to paint time
12 to 24 Hours
Working time
No limit
Application tools
Filling knife
Blade.
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
A+
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with
Water.
Pack sizes
  • Tube 0.33 KG
  • Tub 1.50 KG
  • Bucket 4 KG

Technical documents

Datasheet

Download

Surfaces

Ready To Use Filler can be applied to any substrates either
unpainted or painted:
- Gypsum plaster, plasterboards/drywall lining
- Old painted surfaces, cement, concrete, cellular concrete
- Breeze blocks, bricks, stone and primed wood

Directions for use

Do not apply on exterior surfaces.

Application

1

Apply manually using a blade or trowel

2

Fills up to 1cm deep

3

Can be painted 12-24 hours after application, dependant on the substrate, coat thickness, and ambient conditions

Your questions

See all

Do I need to spot prime to prevent flashing and grinning if my paint has a high sheen level?