INTERIOR SURFACES
INTERIOR FILLER
REPAIRS ON WALLS & CEILINGS:
Offers a one coat fill and can be filled to any depth. With no need to spot prime, it's easy to sand and won't flash o...
Offers a one coat fill and can be filled to any depth. With no need to spot prime, it's easy to sand and won't flash o...
- Will not shrink or slump
- Easy to sand
- No need to spot prime
- Will not flash or grin
- Characteristics
- Technical documents
- Surfaces
- Directions for use
- Application
- Your questions
Characteristics
REPAIRS ON WALLS & CEILINGS:
Offers a one coat fill and can be filled to any depth. With no need to spot prime, it's easy to sand and won't flash or grin, shrink or slump. Suitable for internal use and sets in 30-40 minutes.
Offers a one coat fill and can be filled to any depth. With no need to spot prime, it's easy to sand and won't flash or grin, shrink or slump. Suitable for internal use and sets in 30-40 minutes.
Code
TTREB7051GB
Surface condition
Interior
Task
Filling and repairing (holes, gaps, cracks)
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Gypsum plaster, plasterboards/drywall lining
Old painted surfaces
Cement, concrete, cellular concrete, breeze blocks, bricks, stone
Old painted surfaces
Cement, concrete, cellular concrete, breeze blocks, bricks, stone
Overcoat with
Any type of filler, paint or wall coating
Maximum recommended application thickness
No depth limitation
Mixing rate
/
Ready to paint time
12 to 24 Hours
Working time
30 to 40 min
Application tools
Filling knife
Blade
Trowel.
Blade
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
A+
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity
Clean tools with
Water.
Pack sizes
- Box 1 KG
- Box 2 KG
- Bag 5 KG
- Bag 10 KG
Surfaces
Gypsum plaster, plasterboards/drywall lining
Old painted surfaces
Cement, concrete, cellular concrete, breeze blocks, bricks, stone
Old painted surfaces
Cement, concrete, cellular concrete, breeze blocks, bricks, stone
Directions for use
Do not apply on exterior surfaces.
Application
1
Mixing rate: Add 500ml water per 1kg powder (50%).
Add powder to water at room temperature. Stir until smooth.
Add powder to water at room temperature. Stir until smooth.
2
Apply manually using a coating blade or trowel. No fill depth limit.
3
Can be painted 12-24 hours after application, dependant on the substrate, coat thickness, and ambient conditions